MIL-P-52910B(ME)
11 May 1988
SUPERSEDING
MIL-P-52910A(ME)
8 March 1979
MILITARY SPECIFICATION
PALLET: CARGO
FOR RIBBON BRIDGE TRANSPORTER
This specification is approved for use within the USA Belvoir Research,
Development and Engineering Center, Department of the Army, and is
available for use by all Departments and Agencies of the Department of
Defense.
1.
SCOPE
1.1 Scope. This specification covers cargo pallets capable of functioning
with the ribbon bridge transporter.
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications, standards, and handbooks. The following
specifications, standards, and handbooks form a part of this specification
to be extent specified herein. Unless otherwise specified, the issues of
these documents shall be those listed in the issue of the Department of
Defense Index of Specifications and Standards (DoDISS) and supplement
thereto, cited in the solicitation.
STANDARDS
MILITARY
MIL-STD-105
-Sampling Procedures and Tables for Inspection by
Attributes.
MIL-STD-129
-Marking for Shipment and Storage.
MIL-STD-209
-Slinging and Tiedown Provisions for Lifting and
Tying Down Military Equipment.
MIL-STD-889
-Dissimilar Metals.
Beneficial comments (recommendations, additions, deletions) and any
pertinent data which may be of use in improving this document should be
addressed to: USA Belvoir Research, Development, and Engineering Center,
ATTN: STRBE-TSE, Fort Belvoir, VA 22060-5606 by using the self-addressed
Standardization Document Improvement Proposal (DD Form 1426) appearing at
the end of this document or by letter.
AMSC N/A
FSC 5420
DISTRIBUTION STATEMENT A. Approved for public release, distribution is
unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business